The Smash Zone integrates a pearlized version of Brunswick's exciting EnMotionâ„¢coverstock with an updated version of the original Infernoâ„¢core and a high gloss polish finish. This combination creates an ultra-low RG symmetric core ball that gets through the front part of the lane then rev's strongly to create excellent mid-lane recovery and a continuous back-end reaction.
The Smash Zone uses a Pearlized version of the EnMotion coverstock. EnMotion combines the best elements from our PowerKoilâ„¢, Activatorâ„¢ and N'Controlâ„¢ coverstock systems. The Smash Zone unites EnMotion coverstock with an updated version of the original Inferno core that lowers the RG diff to reduce problems with over flaring. Ultra-low-RG's are known for strong mid-lane recovery moves and their controllable and continuous back-end hooking action. Brunswick has created a strong revving counterpart to the Twisted Fury that will match-up better on lane patterns that create excessive length or over/under reaction problems for higher RG balls.
Out of the Box: With its High Gloss Polish finish, the Smash Zone is an ideal symmetric core ball for medium-dry to Medium-oily lane conditions.
If your Smash Zone goes too long: Dull the surface using 1000-grit or rougher abrasive. The hooking action will increase and its arc will become more even, creating a better match-up for heavily oiled lane conditions and for smoothing over/under reactions seen on wet/dry lane conditions.
If your Smash Zone hooks too early: You will need a higher RG ball such as the Swarm or Avalanche Pearl to create more length.
Blems are seconds due to a cosmetic blemish, but the specifications fall out of the 2-4" & 2-4 oz. range. There are a couple of areas that the ball would not meet some first quality manufacturing specifications (i.e. core chip or engraving error). Blems will have an X stamped by the serial number. The label on the box is stamped X-Blem.
NOTE: Due to the limited availability of Blems, X-Outs, and Seconds pin placement and top weight are not guaranteed.