How To Make Angle Adjustments on Dry Lanes
If you are trying to learn how to make angle adjustments on dry lanes
, then kindly consider the following keys to guide you in hitting the pocket consistently:
1. Lane Oil Conditions
2. Initial Alignment
3. Angle Change
for Dry Lanes
Everything in learning how to make angle adjustments on dry lanes
begins with an understanding of the lane conditions and with good initial alignment. The lane oiling conditions are always the essential element in determining how to line up initially. Lane conditions have the greatest concentration of oil on the front end of the lane, the front twenty feet of the lane typically, and in the middle portions of the front end of the lane between the 10 board on the left side of the lane and the 10 board on the right side of the lane.
In most bowling centers, the oiling pattern during the day time hours will allow bowlers to line up somewhere around the second arrow or tenth board from the edges of the lane (right side for right handers, left side for left handers) and to place their alignment foot on or near the center "Dot" on the approach which corresponds to the 20 (twenty) board or the center board. Placing the instep of the left shoe (for right handed bowlers) covering the 20 board will position the outside of the bowling shoulder very nearly in front of the 10 board or second arrow. Therefore, initial alignment on freshly oiled lanes usually means targeting or spotting the 10 board or very near that 10 board, perhaps at the 8 or 9 board or even the 11 board depending on the bowler.
If you use this alignment positioning when you begin all of your sessions on the lanes, then you will base angle adjustments for dry lanes from this initial alignment. After making a few deliveries and you warm up and reach your normal ball delivery speed range, you can then "read" the lane condition and make angle adjustments accordingly. Once you feel you have the best of your available bowling balls in hand and you are not seeing your ball finish squarely in the pocket but rather hooking excessively onto the head pin or perhaps missing the head pin to the left (right handed bowlers) when you make a good delivery over your selected target board, then making adjustments to the left side of the approach by changing your angle to the pocket is the next step.
Generally speaking, if your ball rolls or hooks too soon due to dry lane conditions and hooks too far onto the nose of the head pin or misses the head pin to the left entirely, then adjusting the positioning of your feet on the approach and your target on the lane to the left is a dependable adjustment. A good technique is to move your feet two boards on the lane and your target with your eyes one board in the same direction and to the left for dry lane conditions so you automatically make an effective angle change and increase your chances of the ball hitting the pocket. Be sure to move both your feet and your target on the lane together and in the same direction. There are always exceptions to any "rules of thumb" such as 3:1 ratio adjustments or 1:1 ratio adjustments, but this angle change technique of 2:1 is effective and very useful for nearly all lane conditions.
Don't be afraid to make multiple adjustments in 2:1 ratios with your feet and eyes at the target area until you achieve a desired result. Sometimes moving the feet 4 boards and the eyes 2 boards is required to make the necessary angle adjustment so your ball hits the pocket squarely. In some cases, greater adjustments are needed such as 6:3 or perhaps 8:4 adjustments. If your ball misses the head pin to the left entirely, expect to make angle adjustments at a minimum of 4:1 ratios, perhaps even in greater ratios. Also, expect to make occasional angle adjustments while you bowl or when you change lanes.
Your feet are not nailed to the floor - do not fear making angle adjustments but do remember to try and follow these recommended techniques so your ability to hit the pocket consistently improves over time. Do not be afraid to practice these angle adjustments for dry lanes during practice session (open play) by sweeping the practice lane from your starting position to the left in prescribed ratios so you emulate changing conditions in your competitions and making angle adjustments an easy process.
We hope these tips help you learn how to make adjustments on the lanes
bowlingball.com has become the No. 1 e-tailer of choice for bowling equipment by the consumer of America. Once you have found any item you wish to order, please be reminded that every item at our site comes with free shipping an no hidden charges. To place your order, simply follow our easy online instructions or give us a call at (888) 265-2695 and one of our sales associates will be ready to assist. Thanks for visiting bowlingball.com.