The Swarm combines a pearlized PowerKoil 18 coverstock with the new medium RG Honeycomb core to create a strong skid/snap ball reaction. With its pearlized surface the Swarm delivers good length on all but the driest lane conditions combined with a aggressive and angular breakpoint.
Aggressive Reactive Coverstock: PowrKoil 18 coverstock is a proven performer that has probably been on more bowling balls than any other Reactive coverstock in the bowling industry. PowrKoil 18 has been used on some of Brunswick's most successful balls including the Danger Zone, Red Alert and BVP Nemesis. Aggressive in the oil and strong off the dry, PowrKoil 18 is a perennial favorite among all styles of bowlers.
Medium RG Honeycomb Core: The Swarm uses Brunswick's new Multi-Sided Honeycomb Core System which incorporates a honeycomb of high and low density fillers to create an optimum medium RG match-up for length and angularity. The Swarm's medium RG helps push the ball through the mid-lane, creating a buzz at the breakpoint that stings the pins.
High Gloss Polish Finish: The Swarm is finished with Brunswick's High Gloss Polish Factory Finish. This finish works beautifully with PowerKoil 18 to create length and a angular back-end.
â€¢Out of the Box: With its High Gloss Polish finish the Swarm will match up well on medium-oily to medium-dry lane conditions.
â€¢ When Dulled: The Swarm's hooking action will increase and its arc will become more even, creating a better match-up for oily lane conditions and help blend the over/under reactions seen on wet/dry lane conditions.
The Swarm can be drilled using the standard drilling techniques developed for two-piece balls, see the drilling instructions link below for reaction characteristics and layout details.
The Swarm is finished with Brunswick's Factory Finish High Gloss Polish. To bring your Swarm back to its original factory finish sand the surface to 400-grit then use Brunswick's Factory Finish High Gloss Polish. Available from your local Pro Shop.
Blems are seconds due to a cosmetic blemish, but the specifications fall out of the 2-4" & 2-4 oz. range. There are a couple of areas that the ball would not meet some first quality manufacturing specifications (i.e. core chip or engraving error). Blems will have an X stamped by the serial number. The label on the box is stamped X-Blem.
NOTE: Due to the limited availability of Blems, X-Outs, and Seconds pin placement and top weight are not guaranteed.